Chrysler 200: To Deactivate
A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the vehicle will deactivate Electronic Speed Control without erasing the set speed memory. Pressing the ON/OFF button or turning the ignition switch OFF erases the set speed memory.
To Set A Desired Speed
Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button and release. Release the accelerator and the vehicle will operate at the selected s ...To Resume Speed
To resume a previously set speed, push the RES (+) button and release. Resume can be used at any speed above 20 mph (32 km/h). ...See also:
Trunk release
Trunk ReleaseButton
Use the Remote Keyless Entry (RKE)transmitter to open the trunk fromoutside the
vehicle. From inside thevehicle the trunk lid can be released bypressing the TRUNK
RELEASE bu ...
Windshield wiper and washer switch
Windshield wiper
and washer switch
The windshield wiper and washer operates when the ignition switch is in the ON
position.
Push the lever down to operate the wiper at the following spee ...
Mirror Adjustment
Exterior Mirrors
Controls for the outside power mirrors are located on the driver door.
1. Turn the control knob to the L (left) or R (right) selecting the driver or passenger mirror.
2. Push the ...