Subaru Legacy: Top tether anchorages
Your vehicle is equipped with three top tether anchorages so that a child restraint system having a top tether can be installed in the rear seat. When installing a child restraint system using top tether, proceed as follows, while observing the instructions by the child restraint system manufacturer.
Since a top tether can provide additional stability by offering another connection between a child restraint system and the vehicle, we recommend that you use a top tether whenever one is required or available
Installation of child restraint systems by use of lower and tether anchorages
(LATCH)
WARNING
● Child restraint systems and seatbelts can become hot in a vehicle that has
been closed up in sunny weather; they could burn a small child. Check the child
restraint system before ...
Tether anchorage location
Legacy
Three tether anchorages are installed on the rear shelf behind the rear seat
head restraint. Open the cover flap to use each anchorage.
Outback
Three tether anchorages, i.e., ones for ...
See also:
Freeing a frozen door lock
To prevent a door lock from freezing, apply deicer through the key hole. If the
lock becomes frozen, heat the key before inserting it into the key hole or use the
remote keyless entry keyfob (if s ...
To Play a Disc
To load or play discs, the ignition
switch must be in the ACCESSORY
(I) or ON (II) position.
You operate the disc changer with
the same controls used for the radio.
To select the disc changer, ...
Engine
Problem
Possible causes/consequences and •► Solutions
The yellow Check
Engine warning lamp
lights up while the
engine is running.
There may be a malfunction, for exampl ...
