Chrysler 200: Towing Tips - Trailer Towing - Starting and operating - Chrysler 200 Owners ManualChrysler 200: Towing Tips

Before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away from heavy traffic.

Make sure all trailer and vehicle lights are working properly — including hazard flashers.

Towing Requirements – Trailer Lights And Wiring
Whenever you pull a trailer, regardless of the trailer size, stop lights and turn signals on the trailer are required for motoring safety. ...

Automatic Transmission
The DRIVE range can be selected when towing. However, if frequent shifting occurs, select the 3 range (for a four-speed automatic) or select a lower gear using the AutoStick shift control. NOTE ...

See also:

Fault tracing and actions
If the message Windscreen Sensors blocked is displayed, this means that the camera is obscured and cannot detect pedestrians, vehicles or road marker lines in front of the vehicle. This, in turn, ...

Automatic Transmission
CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REV ...

Rear-facing child restraint installation using latch
Refer to all Warnings and Cautions in the Child Safety and Child Restraint sections before installing a child restraint. Follow these steps to install a rear-facing child restraint using the Latch ...