Subaru Legacy: Transmission control system warning - AT OIL TEMP warning light (AT and CVT models) - Warning and indicator lights - Instruments and controls - Subaru Legacy Owners ManualSubaru Legacy: Transmission control system warning

If the “AT OIL TEMP” warning light flashes after the engine has started, it may indicate that the transmission control system is not working properly. Contact your nearest SUBARU dealer for service immediately.

    AT OIL TEMP warning light (AT and CVT models)
    The AT oil temperature warning light “AT OIL TEMP” illuminates when the ignition switch is turned to the “ON” position and turns off after approximately 2 seconds. If this light illuminate ...

    Low tire pressure warning light (U.S.-spec. models)
    When the ignition switch is turned to the “ON” position, the low tire pressure warning light will illuminate for approximately 2 seconds to check that the tire pressure monitoring system (TP ...

    See also:

    Limited braking performance on salt treated roads
    WARNING The layer of salt on the brake discs and the brake pads/linings may cause a delay in the braking effect, resulting in a significantly longer braking distance, which could lead to ...

    Type A inside mirror (if equipped)
    The mirror has a day and night position. Pull the tab at the bottom of the mirror toward you for the night position. Push it away for the day position. The night position reduces glare from head ...

    MP3 Format
    There are guidelines that must be met, when creating an MP3 disc or the CD might not play. The guidelines are: • Sampling rate: 8 kHz, 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, and 48 k ...