Mercedes-Benz E-Class: Transmission position and drive program display
The current transmission position and drive program appear in the multifunction display.
1. Transmission position display
2. Drive program display
The arrows in the transmission position display show how and into which transmission positions you can change using the DIRECT SELECT lever.
If the transmission position display in the multifunction display is not working, you should pull away carefully to check whether the desired transmission position is engaged. Ideally, you should select transmission position D and drive program E or S. Do not restrict the shift range.
Overview of transmission positions
The DIRECT SELECT lever is on the right of the steering column. P Park position with parking lock R Reverse gear N Neutral D Drive The DIRECT SELECT lever always returns to its ori ...Engaging park position P
•► Push the DIRECT SELECT lever in the direction of arrow P. The automatic transmission shifts automatically into park position P if you open the driver's door when the vehicle is sta ...See also:
Time
Setting the time zone
1. "Settings"
2. "Time/Date"
3. "Time zone"
4. Select the desired time zone.
The time zone is stored.
Setting the time
1. "Settings" ...
Certification label
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This
is called the GVWR (Gross Vehi ...
Sub-channels
Example of an HD Radio station with sub-channels
In many cases, a main HD Radio station (FM wavebands only) will also have sub-channels
offering additional types of programming or music.
In such ...