Subaru Legacy: Tripped sensor identification
The security indicator light flashes when the alarm system has been triggered. Also, the number of flashes indicates the location of unauthorized intrusion or the severity of impact on the vehicle.
When the ignition switch is turned to the “ON” position, the indicator light will illuminate for 1 second and then flash as follows:
● When a door or rear gate (Outback) was opened: 5 times
● When the trunk (Legacy) was opened: 4 times
● When a strong impact or multiple impacts were sensed: twice (only models with
shock sensors (dealer option))
● When a light impact was sensed: once (only models with shock sensors (dealer option))
Arming the system
CAUTION
In passive mode, the system will automatically activate the alarm but WILL NOT
automatically lock the doors. In order to lock the doors you must either lock them
as indicated in step 4 be ...
Shock sensors (dealer option)
The shock sensors trigger the alarm system when they sense impacts applied to
the vehicle and when any of their electric wires is cut. The alarm system causes
the horn to sound and the turn signal ...
See also:
Remote Lock/Unlock/Start
Select Remote Lock/Unlock/Start
and the following will be displayed:
• Unlock Feedback (Lights)
• Locking Feedback
• Door Unlock Options
• Remote Recall
• Passive Entry
• Remote Le ...
Unleaded fuel
Each Volvo has a three-way catalytic converter and must use only unleaded gasoline.
U.S. and Canadian regulations require that pumps delivering unleaded gasoline be
labeled "UNLEADED". O ...
CD/DVD disc maintenance
To keep a CD/DVD in good condition, take the followingprecautions:
1. Handle the disc by its edge; avoid touching thesurface.
2. If the disc is stained, clean the surface with a soft cloth,wiping fr ...
