Mazda Mazda6: Turn and Lane-Change Signals
Turn Signal
Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self-cancel after the turn is completed.
If the indicator light continues to flash after a turn, manually return the lever to its original position.
Green indicators on the dashboard show which signal is working.
Lane-change signals
Move the lever slightly toward the direction of the change ―until the indicator flashes― and hold it there. It will return to the off position when released.
NOTE:
- If an indicator light stays on without flashing or if it flashes abnormally, one of the turn signal bulbs may be burned out.
- A personalized function is available to change the number of flashes.Refer to Personalization Features.
- A personalized function is available to change the turn indicator sound volume.Refer to Personalization Features.
Lighting Control
Headlights
Type A (Without
AUTO position)
Turn the headlight switch to turn the headlights, other exterior lights and dashboard
illumination on or off.
NOTE:
- If the light switch is left o ...
Fog Lights
Use this switch to turn on the fog lights.
They help you to see as well as to be seen.
To turn the fog lights on, rotate the fog light switch to the
position.
The headlight switch must be in the
...
See also:
Economical driving conserves natural resources
Better driving economy may be obtained by thinking ahead, avoiding rapid starts
and stops and adjusting the speed of your vehicle to immediate traffic conditions.
Observe the following rules:
B ...
Instrument panel light control button
The brightness of the instrument panel lights can be adjusted.
Type A
Pressing the button will adjust
brightness of the instrument
panel lights.
Type B
Pressing the button will adjust
br ...
Accepting or Declining a Call
When an incoming call is received,
the infotainment system mutes and
a ring tone is heard in the vehicle.
Accepting a Call
Turn the Menu knob to “Answer”
and press SELECT to accept
the c ...
