Toyota Camry: Turn signal lever - Driving procedures - When driving - Toyota Camry Owners ManualToyota Camry: Turn signal lever

The turn signal lever can be used to show the following intentions of the driver:

1 Right turn

1 Right turn
2 Left turn
3 Lane change to the right (push and hold the lever partway)
The right hand signals will flash until you release the lever.
4 Lane change to the left (push and hold the lever partway)
The left hand signals will flash until you release the lever.

■Turn signals can be operated when

Vehicles without a smart key system: The engine switch is in the “ON” position.

Vehicles with a smart key system: The “ENGINE START STOP” switch is in IGNITION ON mode.

■If the indicators flashes faster than usual

Check that a light bulb in the front or rear turn signal lights has not burned out.

    Downshift restriction warning buzzer
    To help ensure safety and driving performance, downshifting operation may sometimes be restricted. In some circumstances, downshifting may not be possible even when the shift lever or paddle shift ...

    Parking brake
    To set the parking brake, fully depress the parking brake pedal with your left foot while depressing the brake pedal with your right foot. (Depressing the pedal again releases the parking ...

    See also:

    Customization that can be configured at Toyota dealer
    Settings (e.g. the time elapsed before lights turn off) can be changed. ...

    Remote Trunk Release
    To open the trunk, press on the Remote Keyless Entry (RKE) transmitter. Emergency Trunk Release Handle Notice: Do not use the emergency trunk release handle as a tie-down or anchor point when secur ...

    Driving tips
    ● On a road surface where there is a risk of wheelspin (for example, a snow- or gravel-covered road), you can pull away from a standstill safely and easily by first selecting the 2nd gear of ...