Volvo S60: Turn signals
1. Remove the headlight housing from the vehicle (see page 306).
2. Remove the cover by pulling it straight out.
3. Pull the holder to access the bulb.
4. Press in the bulb and turn it to remove it from the holder.
5. Press and turn the new bulb into place.
6. Reinsert the bulb holder into the headlight housing.
7. Put the cover back into position and reinstall the headlight housing.
Extra high beam
1. Remove the headlight housing from the vehicle (see page 306).
2. Remove the cover over the bulbs (see page 308).
3. Remove the bulb by turning it counterclockwise and pulling it straight out.
...
Taillight housing
The bulbs in the taillight cluster are replaced from inside the trunk (not the
LED functions).
NOTE
Before starting to replace a bulb, see page 306.
1. Remove the covers in the left/right ...
See also:
Tire specification and pressure label
Tire specification
and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance
for normal driving.
The tire label located on the driver's sid ...
Operating Instructions (Uconnect™ Phone) — If Equipped
Refer to “Uconnect™ Phone” in the Uconnect™ User
Manual located on the DVD for further details. ...
Introduction
Adaptive Cruise Control (ACC) is an optional system designed to assist the driver
by maintaining a set speed or a set time interval to the vehicle ahead. It is primarily
intended for use on long s ...
