Subaru Legacy: Upshift/downshift indicator (AT and CVT models) - Select lever/gear position indicator - Warning and indicator lights - Instruments and controls - Subaru Legacy Owners ManualSubaru Legacy: Upshift/downshift indicator (AT and CVT models)

When the manual mode is selected, the gear position indicator (which shows the current gear selection) and the upshift/ downshift indicator light up. Refer to “Automatic transmission/Continuously variable transmission” F7-18.

    Select lever/gear position indicator
    1) Upshift/downshift indicator (AT and CVT models) This indicator shows the position of the shift lever (MT models) or select lever (AT and CVT models). ...

    Gear position indicator setting (MT models)
    The gear position indicator light can be activated or deactivated by performing the following procedure. 1. Turn the ignition switch to the “LOCK” position. 2. Press the trip knob to show “ ...

    See also:

    Headlight
    CAUTION Halogen headlight bulbs become very hot while in use. If you touch the bulb surface with bare hands or greasy gloves, fingerprints or grease on the bulb surface will develop into hot spot ...

    GM Mobility Reimbursement Program (U.S. and Canada)
    This program is available to qualified applicants for cost reimbursement of eligible aftermarket adaptive equipment required for the vehicle, such as hand controls or a wheelchair/scooter ...

    Storing wheels and tires
    When storing complete wheels (tires mounted on rims), they should be suspended off the floor or placed on their sides on the floor. Tires not mounted on rims should be stored on their sides or sta ...