Subaru Legacy: Use of engine braking - Braking tips - Braking - Starting and operating - Subaru Legacy Owners ManualSubaru Legacy: Use of engine braking

Remember to make use of engine braking in addition to foot braking. When descending a grade, if only the foot brake is used, the brakes may start working improperly because of brake fluid overheating, caused by overheated brake pads. To help prevent this, shift into a lower gear to get stronger engine braking.

    When the brakes get wet
    When driving in rain or after washing the vehicle, the brakes may get wet. As a result, brake stopping distance will be longer. To dry the brakes, drive the vehicle at a safe speed while lightly d ...

    Braking when a tire is punctured
    Do not depress the brake pedal suddenly when a tire is punctured. This could cause a loss of control of the vehicle. Keep driving straight ahead while gradually reducing speed. Then slowly pull of ...

    See also:

    Temperature control dial
    This dial regulates the temperature of airflow from the air outlets over a range from the blue side (cool) to red side (warm). ...

    Prepare A List
    Make a written list of your vehicle’s problems or the specific work you want done. If you’ve had an accident or work done that is not on your maintenance log, let the service advisor know. ...

    The concept
    The central locking system becomes active when the driver's door is closed. The system simultaneously engages and releases the locks on the following: ▷ Doors. ▷ Trunk lid. ▷ ...