Subaru Legacy: Using a warm water washer
● Keep a good distance of 12 in (30 cm) or more between the washer nozzle and
the vehicle.
● Do not wash the same area continuously.
● If a stain will not come out easily, wash by hand. Some warm water washers are
of the high temperature, high pressure type, and they can damage or deform the resin
parts such as mouldings, or cause water to leak into the vehicle.
Washing the underbody
Chemicals, salts and gravel used for deicing road surfaces are extremely corrosive, accelerating the corrosion of underbody components, such as the exhaust system, fuel and brake lines, brake cabl ...Waxing and polishing
Always wash and dry the vehicle before waxing and polishing. Use a good quality polish and wax and apply them according to the manufacturer’s instructions. Wax or polish when the painted surface ...See also:
Upper half
Pull up on the driver’s side latch to open the
upper half of the console box. The mat may be
removed for cleaning.
The upper half of the console box may be used for
storage of cellular phones. ...
Engine Break-In Recommendations
A long break-in period is not required for the engine and
drivetrain (transmission and axle) in your vehicle.
Drive moderately during the first 300 miles (500 km).
After the initial 60 miles (100 ...
Satellite radio reception
Satellite radio signals are best received in areas with a clear view of the open
sky. In areas where there are tall buildings, trees, tunnels or other structures
that may obstruct the signal of th ...