Buick Regal: Using the Digit Dial Command - Bluetooth (Voice Recognition) - Phone - Infotainment System - Buick Regal Owners ManualBuick Regal: Using the Digit Dial Command

1. Press ► For vehicles without a navigation system, the system responds “Ready,” followed by a tone..

► For vehicles without a navigation system, the system responds “Ready,” followed by a tone.

► For vehicles with a navigation system, the system responds with a tone. After the tone, say “Hands Free.” The system responds “Ready,” followed by a tone.

2. Say “Digit Dial.” The system responds “Digit dial using <phone name>, please say the first digit to dial,” followed by a tone.

3. Say the digits to be dialed one at a time. The system repeats back the digit it heard followed by a tone.

4. Continue entering digits until the number to be dialed is complete.

After the entire number has been entered, say “Dial.” The system responds “OK, Dialing” and dials the number.

► If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number.

► To hear all of the numbers recognized by the system, say “Verify” at any time.

    Using the Dial Command
    1. Press . ► For vehicles without a navigation system, the system responds “Ready,” followed by a tone. ► For vehicles with a navigation system, the system responds with a tone. Aft ...

    Using the Call Command
    1. Press . ► For vehicles without a navigation system, the system responds “Ready,” followed by a tone. ► For vehicles with a navigation system, the system responds with a tone. Aft ...

    See also:

    Outside/recirculated air mode
    ●When driving on dusty roads such as tunnels or in heavy traffic, set the outside/recirculated air mode button to the recirculated air mode. This is effective in preventing outside air from ...

    To Exit Remote Start Mode And Drive The Vehicle
    Before the end of the 15 minute cycle, press and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the Vehicle Security Alarm (if equipped). Then insert the key int ...

    Engine block heater (if so equipped)
    WARNING: - Do not use your engine block heater with an ungrounded electrical system or a 2-pronged adapter. You can be seriously injured by an electrical shock if you use an ungrounded connection ...