Subaru Legacy: Vanity mirror light - Replacing bulbs - Maintenance and service - Subaru Legacy Owners ManualSubaru Legacy: Vanity mirror light

1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.

1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.

2. Pull the bulb out of the socket.

2. Pull the bulb out of the socket.

3. Install a new bulb.

4. Reinstall the lens.

    Map light
    1. Remove the lens by prying the edge of the lens with a flat-head screwdriver. 2. Turn the bulb until the flat surfaces at its ends are aligned vertically. Pull the bulb straight downward to r ...

    Door step light
    1. Remove the lens by prying the edge of the lens with a flat-head screwdriver. 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Reinstall the lens. ...

    See also:

    Mass Storage Media (MEM)
    Infotainment systems with MEM storage are able to record up to 1.1 GB (gigabyte) of music from audio CDs, MP3/WMA/AAC discs, and USB storage devices. The MEM player can also time shift audio ...

    Adaptive Forward Lighting (AFL)
    The Adaptive Forward Lighting System (AFL) pivots the headlamps horizontally to provide greater road illumination while turning. To enable AFL, set the exterior lamp switch to the AUTO posit ...

    Malfunction Indicator Light (MIL)
    If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The Malfunction Indicator Light may also come on steady i ...