BMW 5 Series: Vehicle battery - Replacing components - Mobility - BMW 5 Series Owners ManualsBMW 5 Series: Vehicle battery

Maintenance

The battery is maintenance-free, i.e., the electrolyte will last for the life of the battery.

Your service center will be glad to advise you on questions regarding the battery.

Battery replacement

Only use vehicle batteries that have been Use approved vehicle batteries only.
Only use vehicle batteries that have been approved for your vehicle by the manufacturer; otherwise, the vehicle could be damaged and systems or functions may not be fully available.◀

After a battery replacement, have the battery registered on the vehicle by your service center to ensure that all comfort functions are fully available and that any Check Control messages are no longer displayed.

Charging the battery

In the vehicle, only charge the battery via the terminals, in the engine compartment with the engine off.

Power failure

needs to be reinitialized.

Individual settings need to be reprogrammed:

▷ Seat, mirror, and steering wheel memory:

store the positions again.

▷ Time: update.

▷ Date: update.

▷ Radio station: save again.

▷ Navigation system: wait for the operability of the navigation.

Disposing of old batteries

by your Have old batteries disposed of by your service center or bring them to a recycling center.

Maintain the battery in an upright position for transport and storage. Secure the battery so that it does not tip over during transport

    Changing wheels
    Notes The vehicle equipment does not include a spare tire. When using run-flat tires or tire sealants, a tire does not need to be changed immediately in the event of pressure loss due to a fla ...

    Fuses
    Notes Replacing fuses Never attempt to repair a blown fuse and do not replace a defective fuse with a substitute of another color or amperage rating; this could lead to a circuit overload, ul ...

    See also:

    License plate light bulb replacement
    1. Loosen the retaining screws with a philips head screwdriver. 2. Remove the soket by turning it connterclockwise. 3. Remove the bulb by pulling it straight out. 4. Install a new bulb. 5. Reins ...

    Seat belt maintenance
    Check periodically that the seat belts are in good condition. Use water and a mild detergent for cleaning. Check seat belt mechanism function as follows: attach the seat belt and pull rapidly on t ...

    Instructions for checking tire inflation pressure
    When checking tire inflation pressure, observe the following: ●Check only when the tires are cold. If your vehicle has been parked for at least 3 hours or has not been driven for more than 1 ...