Mercedes-Benz E-Class: Vehicle level
Important safety notes
Your vehicle regulates its height automatically. All-round self-leveling ensures the best possible suspension and constant ground clearance, even with a laden vehicle.
When you drive fast, the vehicle is lowered automatically to improve driving safety and to reduce fuel consumption.
The following vehicle levels are possible:
- normal
- raised: the vehicle is raised by about 0.80 in
(20 mm) when compared with the normal
level
- lowered: the vehicle is lowered by about
0.40 in (10 mm) when compared with the
normal level
The "Normal" and "Raised" vehicle levels can be set manually.
The "Lowered” vehicle level is set automatically:
- at speeds above 70 mph (113 km/h)
- if you have selected "Sports tuning"
Setting the vehicle level
Select the "Normal" setting for normal road surfaces and "Raised" for driving with snow chains or on particularly poor road surfaces.
Your selection remains stored even if you remove the SmartKey from the ignition lock.
WARNING
To help avoid personal injury, keep hands and
feet away from wheel housing area, and stay
away from under the vehicle when lowering
the vehicle chassis.
Setting raised level
•► Start the engine.
If indicator lamp 2 is not lit:
•► Press button 1.
Indicator lamp 2 lights up. The vehicle height is adjusted to raised level.
The Vehicle rising message appears in the display.
The "Raised level" setting is canceled if you:
- drive at speeds above approximately
75 mph (120 km/h)
- drive about 3 minutes at speeds above
50 mph (80 km/h)
The "Raised level" remains active when you are not driving within these speed ranges.
Setting the normal level
•► Start the engine.
If indicator lamp 2 is lit:
•► Press button 1.
Indicator lamp 2 goes out. The vehicle is adjusted to normal level.
AIRMATIC
...Suspension tuning
General notes The electronically controlled damping system works continuously. This improves driving safety and ride comfort. The damping is tuned individually to each wheel and depends on: & ...See also:
If you have a flat tire while driving
If a tire goes flat while you are driving:
1.Take your foot off the accelerator pedal and let the car slow down while driving
straight ahead. Do not apply the brakes immediately or attempt to pull ...
Inserting a disc in a desired position
1. Briefly press the “LOAD” button. If the magazine in the player has an idle
position where you can insert a disc, the disc number indicator associated with
the idle position will blink.
T ...
Changing gea
The automatic transmission shifts to the
individual gears automatically when it is in
transmission position D. This automatic
gearshifting behavior is determined by:
- a shift range restr ...