Subaru Legacy: Vehicle placard - Recommended tire inflation pressure - Tire information - Consumer information and Reporting safety defects - Subaru Legacy Owners ManualSubaru Legacy: Vehicle placard

The vehicle placard is affixed to the driver’s side B-pillar.

The vehicle placard is affixed to the driver’s side B-pillar.

Example:

The vehicle placard shows original tire size, recommended cold tire inflation

The vehicle placard shows original tire size, recommended cold tire inflation pressure on each tire at maximum loaded vehicle weight, seating capacity and loading information.

    Recommended cold tire inflation pressure
    For the recommended cold tire inflation pressure for your vehicle’s tires, refer to “Tires” F12-8. ...

    Adverse safety consequences of under-inflation
    Driving at high speeds with excessively low tire pressures can cause the tires to flex severely and to rapidly become hot. A sharp increase in temperature could cause tread separation, and failure ...

    See also:

    Auto Door Locking/Unlocking
    Your vehicle has customizable settings for the doors to automatically lock and unlock. There are default settings for each of these features. You can turn off or change the settings for thes ...

    Ignition Transmission Lock Check
    While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. ► For automatic transmission vehicles, the ignition should turn to LOCK/OFF only ...

    Notes for locking the doors
    ●Touching the door lock sensor while wearing gloves may delay or prevent lock operation. Remove the gloves and touch the lock sensor again. ●When the lock operation is performed using t ...