BMW 5 Series: Washing in automatic car washes - Car washes - Care - Mobility - BMW 5 Series Owners ManualsBMW 5 Series: Washing in automatic car washes

Give preference to cloth car washes or those that use soft brushes in order to avoid paint damage.

Notes

Note the following:

▷ Make sure that the wheels and tires are not damaged by the transport mechanisms.

▷ Fold in the exterior mirrors; otherwise, they may be damaged, depending on the width of the vehicle.

▷ Deactivate the rain sensor, to avoid unintentional wiper activation.

▷ In some cases, an unintentional alarm can be triggered by the interior motion sensor of the alarm system. Follow the instructions on avoiding an unintentional alarm

Avoid car washes with guide rails higher Guide rails in car washes
Avoid car washes with guide rails higher than 4 in/10 cm; otherwise, the vehicle body could be damaged.◀

Before driving into a car wash

In order to ensure that the vehicle can roll in a car wash, take the following steps:

Manual transmission:

1. Release the parking brake.
2. Drive into the car wash.
3. Shift to neutral.
4. Switch the engine off.
5. Switch on the ignition.

Automatic transmission:

1. Release the parking brake, and deactivate Automatic Hold.
2. Drive into the car wash.
3. Depress the brake pedal as needed.
4. Engage transmission position N.
5. Switch the engine off. In this way, the ignition remains switched on, and a Check-Control message is displayed.

off Transmission position P with the ignition off
When the ignition is switched off, position P is engaged automatically. When in an automatic car wash, for example, ensure that the ignition is not switched off accidentally.◀

The vehicle cannot be locked from the outside when in transmission position N.

A signal is sounded when an attempt is made to lock the vehicle.

Transmission position

Transmission position P is engaged automatically:

▷ When the ignition is switched off.
▷ After approx. 15 minutes.

    Car washes
    Notes Steam jets or high-pressure washers When using steam jets or high-pressure washers, hold them a sufficient distance away and use a maximum temperature of 140 ℉/ 60 ℃. Holdi ...

    Headlamps
    ▷ Do not rub dry and do not use abrasive or caustic cleansers. ▷ Soak areas that have been soiled e.g. due to insects, with shampoo and wash off with water. ▷ Thaw ice with d ...

    See also:

    How to use the SETTING button
    When the SETTING button is pressed, the Settings screen will appear on the display. You can select and/or adjust several functions, features and modes that are available for your vehicle. ...

    MAX COOL maximum cooling
    The MAX COOL function is only available in vehicles for the USA. MAX COOL is only operational when the engine is running. When you activate MAX COOL, climate control switches to the following ...

    Training procedure
    The procedure for training a voice is as follows. 1. Position the vehicle in a reasonably quiet outdoor location. 2. Sit in the driver’s seat with the engine running, the parking brake on, and t ...