Buick Regal: Wheels and Trim—Aluminum or Chrome
The vehicle may have either aluminum or chrome-plated wheels.
Keep the wheels clean using a soft, clean cloth with mild soap and water. Rinse with clean water. After rinsing thoroughly, dry with a soft, clean towel. A wax may then be applied.
Notice: Chrome wheels and other chrome trim may be damaged if the vehicle is not washed after driving on roads that have been sprayed with magnesium, calcium or sodium chloride. These chlorides are used on roads for conditions such as ice and dust.
Always wash the chrome with soap and water after exposure.
Notice: Do not use strong soaps, chemicals, abrasive polishes, cleaners, brushes, or cleaners that contain acid on aluminum or chrome-plated wheels, because the surface could be damaged.
The repairs would not be covered by the vehicle warranty. Use only approved cleaners on aluminum or chrome-plated wheels.
Notice: Never drive a vehicle that has aluminum or chrome-plated wheels through an automatic car wash that uses silicone carbide tire cleaning brushes, as this could cause damage. The repairs would not be covered by the vehicle warranty.
Weatherstrips
Silicone grease on weatherstrips will make them last longer, seal better, and not stick or squeak. Apply silicone grease with a clean cloth. During very cold, damp weather frequent application may be ...Windshield and Wiper Blades
Clean the outside of the windshield with glass cleaner. Clean the rubber blades using a lint-free cloth or paper towel soaked with windshield washer fluid or a mild detergent. Wash the windshield tho ...See also:
General Information
Vehicles with a Universal Handsfree
Phone (UHP) system can use a
Bluetooth® capable mobile phone
with a Hands-Free Profile to make
and receive phone calls. The
infotainment system and voice ...
Fuses
Your vehicle's electrical system is protected by fuses.
If any lights, accessories, or controls don't work, inspect the appropriate circuit
protector. If a fuse has blown, the inside elemen ...
Replacing the High-mount Brake Light Bulb
1. Open the trunk, and remove the
socket from the light assembly by
turning it one-quarter turn counterclockwise.
2. Pull the bulb straight out of its
socket. Push the new bulb straight
int ...