Mercedes-Benz E-Class: 12 V sockets - Features - Stowing and features - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: 12 V sockets

Points to observe before use

The sockets can be used for accessories, e.g.

lamps or mobile phone chargers with a maximum current draw of 180 W (15 A).

If you use the sockets for long periods when the engine is switched off, the battery may discharge.

•► Turn the SmartKey to position 1 in the ignition lock.

i An emergency cut-out ensures that the on-board voltage does not drop too low. If the on-board voltage is too low, the power to the sockets is automatically cut. This ensures that there is sufficient power to start the engine.

Socket in the front-compartment center console

•► To open: slide cover 1 forwards until it

► To open: slide cover 1 forwards until it engages.

•► Lift up the cover of socket 2.

► To close: press cover 1 briefly at the front.

The cover moves back.

Socket in the rear-compartment center console

•► Briefly press cover 2 at the top.

•► Briefly press cover 2 at the top.

The cover opens.

•► Lift up the cover of socket 1.

Socket in the trunk/cargo compartment

Power socket in the trunk (Sedan)

Power socket in the trunk (Sedan)

Power socket in the cargo compartment (Wagon)

Power socket in the cargo compartment (Wagon)

•►  Lift up the cover of socket 1.

    Cigarette lighter
    WARNING When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the vehicle ...

    115 V power socket
    WARNING The 115V AC socket operates at high voltage. Use the 115V AC socket in the vehicle with the same caution and prudence that you exercise when using power outlets at home. Keep any fl ...

    See also:

    Brightness button
    To change the display brightness, press the button. Pressing the button again will change the display to the day or the night display. If no operation is performed within 5 seconds, the disp ...

    Canceling the function for meter/gauge needle movement upon turning on the ignition switch
    It is possible to activate or deactivate the movement of the meter needles and gauge needles that takes place when the ignition switch is turned to the “ON” position. 1. Turn the ignition swi ...

    Warranty Information
    See the Warranty Information Booklet, located on the DVD, for the terms and provisions of Chrysler Group LLC warranties applicable to this vehicle and market. ...