Buick Regal: Airbag Readiness Light - Warning Lights, Gauges, and Indicators - Instruments and Controls - Buick Regal Owners ManualBuick Regal: Airbag Readiness Light

This light shows if there is an electrical problem. The system check includes the airbag sensor, the pretensioners, the airbag modules, the wiring, and the crash sensing and diagnostic module.

For more information on the airbag system, see Airbag System .

The airbag readiness light comes on and stays on for several seconds when the vehicle is started. Then the light goes out.

The airbag readiness light comes on and stays on for several seconds when the vehicle is started. Then the light goes out.

If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away. WARNING
If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away.

    Safety Belt Reminders
    Driver Safety Belt Reminder Light There is a driver safety belt reminder light on the instrument panel cluster. When the engine is started this light begins to flash and a chime comes on for sever ...

    Passenger Airbag Status Indicator
    The vehicle has a passenger sensing system. See Passenger Sensing System  for important safety information. The instrument panel has a passenger airbag status indicator. When the vehicle is s ...

    See also:

    Acceleration
    Rapid acceleration on snow covered, wet, or other slippery surfaces may cause the driving wheels to pull erratically to the right or left. This phenomenon occurs when there is a difference in th ...

    Dehumidified heating
    This mode is used to heat and dehumidify the air. 1. Press the button to the OFF position. 2. Press the air flow control button. 3. Turn the fan control dial to the desired position. 4. Push ...

    Search
    The keypad in the center console can be used to search for a file in the currently selected folder. Start the search by either turning TUNE (to access the folders) or by pressing one of the chara ...