Buick LaCrosse: Antilock Brake System (ABS) Warning Light - Warning Lights, Gauges, and Indicators - Instruments and Controls - Buick LaCrosse Owners ManualBuick LaCrosse: Antilock Brake System (ABS) Warning Light

This light comes on briefly when the

This light comes on briefly when the engine is started.

If the light does not come on, have it fixed so it will be ready to warn if there is a problem.

If the ABS light stays on, turn the ignition off.

If the light comes on while driving, stop as soon as it is safely possible and turn off the vehicle. Then start the engine again to reset the system. If the ABS light stays on, or comes on again while driving, the vehicle needs service. A chime may also sound when the light comes on steady.

If the ABS light is the only light on, the vehicle has regular brakes, but the antilock brakes are not functioning.

If both the ABS and the brake system warning light are on, the vehicle's antilock brakes are not functioning and there is a problem with the regular brakes. See your dealer for service.

See Brake System Warning Light.

See Brake System Messages for all brake related DIC messages.

    Electric Parking Brake Light
    For vehicles with the Electric Parking Brake (EPB), the parking brake status light comes on when the parking brake is applied. If the light continues flashing after the parking brake is re ...

    Traction Off Light
    This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. This light comes on when the Traction Control System (TCS) has been turned ...

    See also:

    Breakdown assistance
    Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not avai ...

    Regulatory Information
    FCC Regulatory information – CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage ...

    Unit
    Move to switch between metric or US when the Unit display is active. Press SET/CLR to confirm the setting. This will change the displays on the cluster and DIC to either metric or English ( ...