BMW 5 Series: AUTO program
Press the button.
Air volume, air distribution, and temperature are controlled automatically:
Depending on the selected temperature, AUTO intensity, and outside influences, the air is directed to the upper body and into the footwell.
The cooling function is switched on automatically with the AUTO program.
Intensity of the AUTO program
With the AUTO program switched on, automatic control of the air volume and air distribution can be adjusted.
Press the left or right side of
the button:
decrease or increase the intensity.
The selected intensity is shown on the display of the automatic climate control.
Switching the rear automatic climate
control on/off
1. "Settings"
2. "Climate"
3. "Rear climate control"
The rear automatic climate control is not operational
if the automatic climate control is
switched off or if t ...
Temperature
Turn the wheel to set the desired
temperature.
The automatic climate control achieves this
temperature as quickly as possible, if necessary
with the maximum cooling or heating capacity,
and ...
See also:
Shift lock release
If the select lever cannot be operated, turn the ignition switch back to the
“ON” position then move the select lever to the “P” position with the select lever
button pressed and brake ped ...
Footnotes — Maintenance
Schedule Additional Required
Services — Severe
a) Or every two years, whichever
comes first.
b) Check all fuel and vapor lines
and hoses for proper hook-up,
routing, and condition. Check that
the purge valve, if the vehicle has
one, wor ...
Traction – AA, A, B, C
The traction grades, from
highest to lowest, are AA, A, B,
and C. Those grades represent
the tire's ability to stop on wet
pavement as measured under
controlled conditions on
specified gov ...
