Nissan Maxima: Automatic operation - Monitor, climate, audio, phone and voice recognition systems - Nissan Maxima Owners ManualNissan Maxima: Automatic operation

Cooling and/or dehumidified heating (AUTO)

This mode may be used all year round as the system automatically works to keep a constant temperature. Air flow distribution and fan speed are also controlled automatically.

1. Push the AUTO button on. (The indicator on the button will illuminate and AUTO will be displayed.) 2. Operate the drivers side temperature control buttons.

- Adjust the temperature display to about 75°F (24°C) for normal operation.

- The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed are also controlled automatically.

- A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.

3. You can individually set drivers and front passengers side temperature using each temperature control button. When the DUAL button or passengers side temperature button is pressed, the DUAL indicator will come on. To turn off the passengers side temperature control, push the DUAL button.

Heating (A/C OFF)

The air conditioner does not activate. When you need to heat only, use this mode.

1. Push the A/C button. (A/C OFF will be displayed and A/C indicator will turn off.) 2. Operate the temperature control buttons to set the desired temperature.

- The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed are also controlled automatically.

- Do not set the temperature lower than the outside air temperature. Otherwise the system may not work properly.

- Not recommended if windows fog up.

Dehumidified defrosting or defogging

1. Push the on. front defroster button on.

(The indicator light on the button will come on.) 2. Operate the temperature control buttons to set the desired temperature.

- To quickly remove ice from the outside of the windows, use the fan speed control dial to set the fan speed to maximum.

- As soon as possible after the windshield is clean, push the AUTO button to return to the automatic mode.

- When the is pushed, the air conditioner will automatically be turned on at outside temperaturesfront defroster button is pushed, the air conditioner will automatically be turned on at outside temperatures above 36°F (2°C). The air recirculate mode automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance.

    Heater and air conditioner (automatic) (Type A)
    1. Temperature control buttons (drivers side) 2. AUTO climate control ON button 3. (front defroster) button 4. Air recirculation button 5. MODE (manual air flow control) button 6. Temperature ...

    Manual operation
    Fan speed control Turn the fan speed control dial to manually control the fan speed. Push the AUTO button to return to automatic control of the fan speed. Air recirculation Push the air recircul ...

    See also:

    Finish Care
    Occasional waxing or mild polishing of the vehicle by hand may be necessary to remove residue from the paint finish. Approved cleaning products can be obtained from your dealer. If the vehicle has a ...

    Playing and pausing songs
    Press (). ...

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences ...