BMW 5 Series: Automatic-Transmission - Engine stop - Driving - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Automatic-Transmission

Switching off the engine 1. Engage transmission position P with the vehicle stopped.
2. Press the Start/Stop button.
The engine is switched off.
The radio ready state is switched on.
3. Set the parking brake.

    Manual transmission
    Switching off the engine 1. With the vehicle at a standstill, press the Start/Stop button. 2. Shift into first gear or reverse. 3. Set the parking brake. ...

    See also:

    Customer Key Programming
    You can program new keys to the system if you have two valid Sentry Keys by performing the following procedure: 1. Cut the additional Sentry Key Transponder blank(s) to match the ignition switch ...

    Switching the warning function on/off
    Press the button ▷ On: the LED lights up. ▷ Off: the LED goes out. The state is stored for the remote control currently in use. ...

    Programming HomeLink
    1. To begin, press and hold the two outer HomeLink buttons (to clear the memory) until the indicator light (1) blinks (after 20 seconds). Release both buttons. 2. Position the end of the hand-hel ...