Chrysler 200: Automatic Transmission Ignition Interlock Systems - Automatic Transmission - Starting and operating - Chrysler 200 Owners ManualChrysler 200: Automatic Transmission Ignition Interlock Systems

These systems prevent the key fob from being removed unless the shift lever is in PARK. They also prevent shifting out of PARK unless the ignition switch is in the ON/RUN position and the brake pedal is applied.

    Automatic Transmission
    CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REV ...

    Key Ignition Park Interlock
    This vehicle is equipped with a Key Ignition Park Interlock which requires the shift lever to be placed in PARK before the ignition switch can be turned to the LOCK/ OFF position. The key fob ca ...

    See also:

    Tire Sealant and Compressor Kit
    This vehicle may come with a spare tire and tire changing equipment or a tire sealant and compressor kit. The kit can be used to temporarily seal small punctures in the tread area of the tire ...

    Service mode
    In service mode, the remote engine start function is temporarily disabled to prevent the system from unexpectedly starting the engine while being serviced. To engage or disengage service mode: 1. ...

    Exit Lighting
    This allows selection of how long the exterior lamps stay on when leaving the vehicle and it is dark outside. Press SELECT when Exit Lighting is highlighted. Turn the Menu knob to select Of ...