Ford Fusion: Bluetooth setup - Telephone - Ford Fusion Owners manualFord Fusion: Bluetooth setup

Before you can use your telephone withyour vehicle it must be bonded to thevehicle telephone system.

Handling of phones

A phone can be connected to the vehiclesystem by using either a cradleconnection or a Bluetooth connection.

On vehicles with a mobile phone cradle,up to five Bluetooth phones can bebonded to the vehicle system.

On vehicles without a mobile phonecradle, up to six Bluetooth phones can bebonded to the vehicle system.

Note: If there is an ongoing call when thephone in use is selected as the new activephone, the call is transferred to the vehicleaudio system.

Note: Even if connected to the carsystem, your phone can still be used inthe usual way.

Requirements for Bluetoothconnection

The following are required before aBluetooth phone connection can bemade.

1. The Bluetooth feature must beactivated on the phone and on theaudio unit. For additional information,refer to your phone user guide2. The private mode must not beactivated on the Bluetooth phone.

3. Search for audio device.

4. Select Ford Audio.

5. The Bluetooth PIN number 0000 mustbe entered on the phone keypad.

Note: A phone call will be disconnectedif the audio/navigation system is switchedoff. If the ignition key is turned to the offposition the phone call will remain inprogress.

Compatibility of phones

CAUTION:

As no common agreement exists,mobile phone manufacturers are ableto implement a variety of profiles intheir Bluetooth devices. Because of this,an incompatibility can occur between thephone and hands-free system, which insome cases may significantly degrade thesystem performance. To avoid thissituation, only recommended phonesshould be used. Please contact yourdealer for more details regarding thecurrent compatibility list.

Phones with Symbian operatingsystem

Note: Certain phones require a specialfile to be installed to enable full phonebookaccess via Bluetooth. This is referred toas a SIS file and will be available via theFord website. Please consult your dealerfor full details.

    Telephone setup
    Requirements for cradleconnection Your phone must be fitted in a mobilephone holder before it can be used as acradle phone with your handsfree/voicecontrol system. You will be able topurchase the cor ...

    Telephone controls
    Ending or rejecting calls By pressing one of several functionbuttons on the audio or navigation unit(example: AM/FM,CD/AUX) active callscan be ended or incoming calls can berejected. Remote control ...

    See also:

    General information
    Overloading the vehicle To avoid exceeding the approved carrying capacity of the tires, never overload the vehicle. Overloading can lead to overheating and increases the rate at which damage de ...

    Engaging park position P
    •► Push the DIRECT SELECT lever in the direction of arrow P. The automatic transmission shifts automatically into park position P if you open the driver's door when the vehicle is sta ...

    ENGINE OVERHEATED — STOP ENGINE
    This message displays and a continuous chime sounds if the engine cooling system reaches unsafe temperatures for operation. Stop and turn off the vehicle as soon as it is safe to do so to avo ...