Volvo S60: Brake Support
If the risk of collision continues to increase after the collision warning has been given, Brake Support is activated. Brake Support prepares the brake system to react quickly, and the brakes are applied slightly. This may be experienced as a light tug.
If the brakes are applied quickly, full braking effect will be provided. Brake Support also increases brake force if the system determines that the driver has not applied adequate pressure on the brake pedal.
Collision Warning
The radar sensor and the camera work together to detect a pedestrian, stationary
vehicles and vehicles that are moving in the same direction as your vehicle. If
there is a risk of collision with a ...
Auto-brake
If a collision is imminent and the driver has not applied the brakes or begun
to steer around the vehicle or pedestrian, the auto-brake function is activated
without the driver pressing the brake ...
See also:
Telephone setup
Requirements for cradleconnection
Your phone must be fitted in a mobilephone holder before it can be used as acradle phone with your handsfree/voicecontrol system. You will be able topurchase the cor ...
Parking brake lining
The break-in maintenance for the parking brake linings should be performed at
a SUBARU dealer. ...
Accessory Power Sockets
Your vehicle has two accessory
power sockets; one is at the front of
the center console and the other is in
the console compartment.
To use an accessory power socket,
the ignition switch mu ...
