BMW 5 Series: Brightness - Settings on the Control 
Display - Displays - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Brightness

Setting the brightness

To set the brightness of the Control Display:

1. "Settings"
2. "Control display"
3. "Brightness"

4. Turn the controller until the desired brightness

4. Turn the controller until the desired brightness is set.
5. Press the controller.

The setting is stored for the remote control currently in use.

Depending on the light conditions, the brightness control may not be clearly visible.

    Units of measure
    Setting the units of measure To set the units for fuel consumption, route/distance and temperature: 1. "Settings" 2. "Language/Units" 3. Select the desired menu item. 4. S ...

    Lamps
    ...

    See also:

    Fluid Level Check – Four-Speed Automatic Transmission
    Use the following procedure to check the automatic transmission fluid level properly: 1. Park the vehicle on level ground. 2. Run the engine at curb idle speed for a minimum of 60 seconds. 3. A ...

    Locking and unlocking from the outside
    To lock the driver’s door from the outside with the key, turn the key toward the rear. To unlock the door, turn the key toward the front. Pull the outside door handle to open an unlocked door. ...

    Clutch fluid (if so equipped)
    Check the clutch fluid level in the reservoir (manual transmissions only). If the fluid level is below the MIN line, add Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 fluid up ...