BMW 5 Series: Calling up information on the info 
display - Computer - Displays - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Calling up information on the info display

Calling up information on the info
Calling up information on the info display

Press the computer button on the turn signal lever.

Information is displayed on the info display of the instrument cluster.

    Indication in the info display
    The information from the computer is shown in the Info display in the instrument cluster. ...

    Information at a glance
    Repeatedly pressing the button on the turn signal lever calls up the following information on the info display: ▷ Range. ▷ Average fuel consumption. ▷ Average speed. ▷ ...

    See also:

    The Blind Spot Monitor detection areas
    The blind spot that vehicles can be detected in are outlined below. The range of the detection area extends to: Approximately 11.5 ft. (3.5 m) from the side of the vehicle The first 1.6 ...

    Engaging park position P
    •► Push the DIRECT SELECT lever in the direction of arrow P. The automatic transmission shifts automatically into park position P if you open the driver's door when the vehicle is stati ...

    Engine compartment overview - 1.6L Duratorq-TDCi (DV) Diesel
    A. Engine coolant reservoir*: See Engine coolant check. B. Brake and clutch fluid reservoir (right-hand drive)*: See Brake and clutch fluid check. C. Engine oil filler cap*: See Engine oil check ...