Buick LaCrosse: Care of the HUD
Clean the inside of the windshield as needed to remove any dirt or film that could reduce the sharpness or clarity of the HUD image.
To clean the HUD lens, use a soft, clean cloth that has household glass cleaner sprayed on it. Wipe the HUD lens gently, then dry it. Do not spray cleaner directly on the lens because the cleaner could leak into the unit.
Head-Up Display (HUD)
WARNING!
If the HUD image is too bright or
too high in your field of view, it
may take you more time to see
things you need to see when it is
dark outside. Be sure to keep the
HUD image dim ...
If You Cannot See the HUD Image When the Ignition Is On
• Is anything covering the
HUD lens?
• Is the HUD dimmer setting bright
enough?
• Is the HUD image adjusted to
the proper height?
• Are you wearing polarized
sunglasses?
• Still ...
See also:
Skip channel selection
When in the SAT mode, press the “SEEK” button “”
or “” continuously to change to the
channel selection mode. Pressing the “SEEK” button “”
changes the channel up by 10 step ...
Selecting a magnetic zone
Magnetic zones.
The earth is divided into 15 magnetic zones. The correct zone must be selected
for the compass to work correctly.
1. Put the ignition in mode II.
2. Using a pen or similar objec ...
Loading Discs in the Changer
To load multiple discs in one
operation:
1. With the ignition in the
ACCESSORY (I) or the ON (II)
position, press and hold the LOAD
button until you hear a beep and
see ‘‘LOAD’’ in ...
