BMW 5 Series: Child seat security
Child seat security
The rear safety belts and the front passenger safety belt can be locked against pulling out for mounting the child restraint fixing systems.
Locking the safety belt
1. Pull out the belt webbing completely.
2. Secure the child restraint fixing system with
the belt.
3. Allow the belt webbing to be pulled in and
pull it taut against the child restraint fixing
system. The safety belt is locked.
Unlocking the safety belt
1. Unbuckle the belt buckle.
2. Remove the child restraint fixing system.
3. Allow the belt webbing to be pulled in completely.
On the front passenger seat
After installing a child restraint fixing system in
the front passenger seat, make sure that the
front, knee and side airbags on the front passenger
side are deactivated.
Deactivate the front p ...
LATCH child restraint fixing
system
LATCH: Lower Anchors and Tether for CHildren. ...
See also:
Manual Compass Calibration
If the compass appears erratic or inaccurate, and the
variance has been properly set, you may wish to manually
recalibrate the compass. To manually calibrate the
compass:
1. Start the engine. L ...
Function
Location of the laser sensor in the windshield2
City Safety™ monitors traffic ahead of you using a laser sensor mounted in the
upper section of the windshield. If a collision is imminent, City Sa ...
Parking brake
Before leaving the vehicle, make sure that the parkingbrake is fully applied.
Also, be certain to leave thetransmission in PARK.
The parking brake lever is located in the center console.
To apply ...
