BMW 5 Series: Comparison with ordinary remote 
control - Comfort Access - Opening and closing - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Comparison with ordinary remote control

The functions can be controlled by pressing the buttons of the remote control or Comfort Access.

Unlocking

Fully grasp a door handle, arrow 1. This corresponds

Fully grasp a door handle, arrow 1. This corresponds to pressing the Locking button.

Locking

Press the area on the door handle, arrow 2, with

Press the area on the door handle, arrow 2, with your finger for approx. 1 second.

This corresponds to pressing the button. button.

To save battery power, ensure that the ignition and all electronic systems and/or power consumers are switched off before locking the vehicle.

Convenient closing

Press the area on the door handle, arrow 2, with the finger and hold it down.

In addition to locking, the windows and the glass sunroof are closed.

Monitor the closing process to ensure that Monitor the closing process
Monitor the closing process to ensure that no one becomes trapped.◀

Unlocking the trunk lid separately

Press the button on the exterior of the trunk lid

This corresponds to pressing the button button

cargo area Do not place the remote control in the cargo area
Take the remote control with you and do not leave it in the cargo area; otherwise, the remote control is locked inside the vehicle when the trunk lid is closed.◀

    Functional requirements
    ▷ There are no external sources of interference nearby. ▷ To lock the vehicle, the remote control must be located outside of the vehicle. ▷ The next unlocking and locking cycle ...

    Open trunk lid with no-touch activation
    With Comfort Access, the trunk lid can be opened with no-touch activation using the remote control you are carrying. A sensor detects a directed foot motion in the center of the area at the rea ...

    See also:

    Gauges
    Gauges in the instrument panel 1 - Speedometer 2 - Fuel gauge. Please note that the fuel level indicator in the gauge moves from right to left as the amount of fuel in the tank decreases. The ar ...

    Emissions Testing
    Testing of Readiness Codes If you take your vehicle for an emissions test shortly after the battery has been disconnected or gone dead, it may not pass the test. This is because of certain вАШ ...

    Brake System Indicator
    The brake system indicator normally comes on when you turn the ignition switch to the ON (II) position and as a reminder to check the parking brake. It will stay on if you do not fully r ...