Buick Regal: Compass - Controls - Instruments and Controls - Buick Regal Owners ManualBuick Regal: Compass

There is a compass display in the Driver Information Center (DIC).

The compass receives its heading and other information from the Global Positioning System (GPS) antenna, StabiliTrak, and vehicle speed information.

Avoid covering the GPS antenna for long periods of time with objects that may interfere with the antenna's ability to receive a satellite signal.

See Backglass Antenna  and Satellite Radio Antenna  for the location of the vehicle's antennas.

The compass system is designed to operate for a certain number of miles or degrees of turn before needing a signal from the GPS satellites. When the compass display shows CAL, drive the vehicle for a short distance in an open area where it can receive a GPS signal. The compass system will automatically determine when the GPS signal is restored and provide a heading again.

See Compass Messages  for more information on the messages that may be displayed for the compass.

    Windshield Wiper/Washer
    The windshield wiper lever is on the side of the steering column. With the ignition in ACC/ ACCESSORY or ON/RUN, move the windshield wiper lever to select the wiper speed. 2: Use for fast wipes. 1 ...

    Clock
    The infotainment system controls are used to access the time and date settings through the menu system. See Operation  for information about how to use the menu system. Setting the Time and Date ...

    See also:

    Warnings And Cautions
    This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against procedures that could result in damage t ...

    Precautions when the vehicle is being towed
    Attach jumper cables (see page 116) to provide current for releasing the electric parking brake and to move the gear selector from the P position to N. Be sure that the steering wheel lock ...

    Multi function display
    1) Multi function display switching knob With the ignition switch in the “ON” position, each successive press of the multi function display switching knob toggles the display in the followi ...