BMW 5 Series: Configuring the prewarning - Collision warning with braking function - Driving comfort - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Configuring the prewarning

After the warning function is switched on, the following can be set via the iDrive:

▷ The prewarning can be switched on/off.
▷ The time of the prewarning can be set.

These settings have no effect on the time of the warning from the Active Cruise Control that prompts the driver to intervene or brake.

    Switching the warning function on/off
    Press the button ▷ On: the LED lights up. ▷ Off: the LED goes out. The state is stored for the remote control currently in use. ...

    Display in the instrument cluster
    The collision warning can be issued in the instrument cluster, in the Head-up Display, and acoustically. Warning stages Adapting your speed and driving style The display does not relieve the ...

    See also:

    Maintenance
    CAUTION! Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect driveability. ...

    Condensation build-up on the inside of the lens
    Contact your Toyota dealer for more information in the following situations. Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. ●Large drops ...

    Tire pressures and wear
    Maintaining the correct tire pressures helps to maximize the tires’ service lives and is essential for good running performance. Check and, if necessary, adjust the pressure of each tire (includ ...