BMW 5 Series: Deactivating/activating DTC Dynamic 
Traction Control - DTC Dynamic Traction 
Control - Driving stability control systems - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Deactivating/activating DTC Dynamic Traction Control

Activating the Dynamic Traction Control DTC provides maximum traction on loose ground.

Driving stability is limited during acceleration and when driving in bends.

Activating DTC

TRACTION is displayed in the instrument Press the button.

TRACTION is displayed in the instrument cluster and the indicator lamp for DSC lights up.

Deactivating DTC

TRACTION and the DSC indicator lamp Press the button again.

TRACTION and the DSC indicator lamp go out.

Indicator/warning lamps

When DTC is activated, TRACTION is displayed in the tachometer.

DTC Dynamic The indicator lamp lights up: DTC Dynamic Traction Control is activated.

    The concept
    The DTC system is a version of the DSC in which forward momentum is optimized. The system ensures maximum forward momentum on special road conditions, e.g., unplowed snowy roads, but driving st ...

    xDrive
    xDrive is the all-wheel-drive system of your vehicle. Concerted action by the xDrive and DSC further optimize traction and driving dynamics. The xDrive all-wheel-drive system variably distributes ...

    See also:

    Reducing Speed While Using Cruise Control
    If the cruise control system is already activated: • Move the thumbwheel toward SET/− and hold until the desired lower speed is reached, then release it. • To slow down in small am ...

    Vent Operation
    Adjusting the Vents Directing airflow Side Vents To adjust the direction of airflow, open the vents and rotate them left and right. Center Vents To adjust the direction of airflow, move the ...

    High-beam headlamps
    •► To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. •► Turn the light switch to or . •► Press the combin ...