BMW 5 Series: Display - Night Vision with pedestrian 
detection - Driving comfort - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Display

Night Vision with pedestrian detection is not available on the rear screen.

Adjustments via the iDrive

With Night Vision switched on:

1. Activate Night Vision with pedestrian detection.
2. Press the controller.

Open the desired menu item.

▷  "Contrast" "Brightness"
▷  "Pedestrian detection" "Contrast"
The settings are stored for the remote control "Pedestrian detection"

The settings are stored for the remote control currently in use.

    Activation/deactivation
    Press the button. ...

    Camera
    Rain, dirt, snow, or ice can impair camera operation. The camera is automatically heated when the external temperatures are low. The camera is automatically cleaned together with the headlamps ...

    See also:

    Remote Key Unlock, Driver Door/All Doors First Press
    This feature lets you program the system to unlock either the driver’s door or all doors on the first press of the UNLOCK button on the RKE transmitter. To change the current setting, proceed ...

    EASY-PACK load-securing kit (Wagon)
    Components and storage The EASY-PACK load-securing kit allows you to use your cargo compartment for a variety of purposes. The accessory parts are located under the cargo compartment floor. †...

    To Exit Remote Start Mode Without Driving The Vehicle
    Press and release the REMOTE START button one time or allow the engine to run for the entire 15 minute cycle. NOTE: To avoid unintentional shut downs, the system will disable the one-time press ...