BMW 5 Series: Displays in the instrument cluster - Driving Experience Switch - Driving stability control systems - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Displays in the instrument cluster

Selected program

displayed The selected program is displayed in the tachometer.

Program selection

list Pressing the button displays a list of the selectable programs.

Display on the Control Display

Program changes can be displayed briefly on the Control Display.

To do so, make the following settings:

1. "Settings"
2. "Driving mode"
3. "Driving mode info"

    ECO PRO
    Consistent tuning to minimize fuel consumption for maximum range with maximum driving stabilization. Comfort functions and the engine controller are adjusted. The program can be configured to in ...

    See also:

    Silencing the horn beep feature
    If desired, the horn beep feature can be deactivated using the Intelligent Key. To deactivate: Press and hold the and buttons for at least 2 seconds. The hazard warning lights will flash 3 tim ...

    Installing forward facing child restraint
    1. Place the child restraint system in the rear seating position. 2. Run the lap and shoulder belt through or around the child restraint system following the instructions provided by its manufact ...

    Dual Dry Clutch (6-Speed C635 Ddct) Automatic Transmission
    This vehicle must be towed with the front wheels OFF the ground (using a flatbed truck, towing dolly, or wheel lift equipment with the front wheels raised). The manufacturer recommends towing yo ...