BMW 5 Series: Distance
Selecting a distance
Adjust the distance according to the traffic
and weather conditions; otherwise, there is the
danger of an accident occurring. Maintain the
prescribed safety distance.◀
Reduce distance
Press the button repeatedly
until the
desired distance is set.
The selected distance, is displayed in the instrument cluster.
Increase distance
Press the button repeatedly
until the
desired distance is set.
The selected distance, is displayed in the instrument cluster.
Changing, maintaining, and storing the
speed
The rocker switch can be pressed while the system
is interrupted to maintain and store the current
speed. DSC Dynamic Stability Control is
switched on, if necessary.
Adapting the desired speed ...
Calling up the desired speed and
distance
While driving
Press the button with the system
switched on.
In the following cases, the stored speed value is
deleted and cannot be called up again:
▷ When the system is switched off.
& ...
See also:
LATCH (Lower Anchors and Tethers for
CHildren) System
LATCH system lower anchor locations
Your vehicle is equipped with special anchor
points that are used with LATCH (Lower Anchors
and Tethers for CHildren) system compatible
child restraints. This ...
Opening and closing the bonnet
Opening the bonnet
1. Pull the lever.
2. Raise the bonnet slightly and pull thecatch towards you.
3. Open the bonnet and support it withthe strut.
Closing the bonnet
Note: Make sure that the ...
Ending a call
To finish the call, perform one of the following procedures:
- Select the Hang up key on the Call in Progress display.
- Push the switch on the
steering wheel.
- When the Call in Progres ...
