Mercedes-Benz E-Class: DISTRONIC PLUS displays in the 
multifunction display - DISTRONIC PLUS - Driving systems - Driving and parking - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: DISTRONIC PLUS displays in the multifunction display

General notes

You can select the distance display in the Assistance menu  of the onboard computer.

Display when DISTRONIC PLUS is deactivated

•► Select the Distance Display function using the on-board computer

When DISTRONIC PLUS is deactivated, you will see the following in the multifunction display:

1. Symbol for activated PRE-SAFE® Brake

1. Symbol for activated PRE-SAFE® Brake
2. Vehicle in front, if detected
3. Distance indicator, current distance to the vehicle in front
4. Specified minimum distance to the vehicle in front; adjustable
5. Own vehicle

Display when DISTRONIC PLUS is activated

Select the Distance Display function using the on-board computer

You will see the stored speed for about five seconds when you activate DISTRONIC PLUS.

After this time, you will see the following in the multifunction display while DISTRONIC PLUS is activated:

1. DISTRONIC PLUS activated

1. DISTRONIC PLUS activated
2. Own vehicle
3. Specified minimum distance to the vehicle in front; adjustable
4. Vehicle in front, if detected

    DISTRONIC PLUS displays in the speedometer
    When DISTRONIC PLUS is activated, one or two segments 2 in the set speed range light up. For design reasons, the speed displayed in the speedometer may differ slightly from the speed set fo ...

    Deactivating DISTRONIC PLUS
    There are several ways to deactivate DISTRONIC PLUS: •► Briefly press the cruise control lever forwards 1. or•► Brake, unless the vehicle is stationary. When you deactivate ...

    See also:

    Satellite Radio
    Vehicles with an XM™ Satellite Radio tuner and a valid XM Satellite Radio subscription can receive XM programming. XM Satellite Radio Service XM is a satellite radio service based in the 48 contig ...

    Passenger compartment
    CAUTION: Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not ...

    Preset buttons
    How to preset channels 1. Press the “SAT” button to select SAT1, SAT2 and SAT3 reception. 2. Select the desired channel. 3. Press one of the preset buttons for more than 1.5 seconds to store th ...