Buick LaCrosse: Electric Parking Brake Light - Warning Lights, Gauges, and Indicators - Instruments and Controls - Buick LaCrosse Owners ManualBuick LaCrosse: Electric Parking Brake Light

For vehicles with the Electric

For vehicles with the Electric Parking Brake (EPB), the parking brake status light comes on when the parking brake is applied. If the light continues flashing after the parking brake is released, or while driving, there is a problem with the Electric Parking Brake system.

A message may also display in the Driver Information Center (DIC).

See Brake System Messages for more information.

If the light does not come on, or remains flashing, see your dealer.

For vehicles with the Electric

For vehicles with the Electric Parking Brake (EPB), the parking brake warning light should come on briefly when ignition is placed in ON/RUN. If it does not come on, then have it fixed so it will be ready to warn if there is a problem.

If this light comes on, there is a problem with a system on the vehicle that is causing the parking brake system to work at a reduced level. The vehicle can still be driven, but should be taken to a dealer as soon as possible. See Parking Brake for more information.

For vehicles with the uplevel or eAssist cluster, this telltale displays in the Driver Information Center (DIC) screen.

    Brake System Warning Light
    The vehicle brake system consists of two hydraulic circuits. If one circuit is not working, the remaining circuit can still work to stop the vehicle. For normal braking performance, both cir ...

    Antilock Brake System (ABS) Warning Light
    This light comes on briefly when the engine is started. If the light does not come on, have it fixed so it will be ready to warn if there is a problem. If the ABS light stays on, turn the ...

    See also:

    Voice control support features
    Tutorial: A feature that helps acquaint you with the system and the procedure for giving commands. Training: A feature that enables the voice control system to become familiar with your voi ...

    Removing a headlamp
    1. Open the bonnet. See Opening andclosing the bonnet. 2. Remove the screws. CAUTION: Do not pull the bumper more than 10mm from its original position. 3. Carefully pull the bumper towards the ...

    Driver Efficiency Gauge
    Driver Efficiency Gauge This gauge assists the driver in operating the vehicle more efficiently and will vary based on driver input. See Driver Efficiency Gauge for more information. ...