Buick LaCrosse: Ending Cruise Control - Cruise Control - Driving and Operating - Buick LaCrosse Owners ManualBuick LaCrosse: Ending Cruise Control

There are three ways to end cruise control:

• To disengage cruise control, step lightly on the brake pedal; when cruise control disengages, the indicator light will not be lit.

• Press • To turn off the cruise control, on the steering wheel.

• To turn off the cruise control, press Erasing Speed Memory on the steering wheel.

    Using Cruise Control on Hills
    How well the cruise control works on hills depends upon the vehicle's speed, load, and the steepness of the hills. When going up steep hills, you might have to step on the accelerator pedal ...

    Erasing Speed Memory
    The cruise control set speed is erased from memory by pressing or if the ignition is turned off. ...

    See also:

    Battery Voltage and Charging Messages
    BATTERY SAVER ACTIVE This message displays when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery saver system starts reducing certain features of t ...

    OIL PRESSURE LOW — STOP ENGINE
    This message displays if low oil pressure levels occur. Stop the vehicle as soon as safely possible and do not operate it until the cause of the low oil pressure has been corrected. Check th ...

    Unlocking doors
    Coupe shown, Sedan similar 1. Carry the Intelligent Key. 2. Push the door handle request switch 1 . 3. The hazard warning lights flash once and the outside buzzer sounds once. 4. Push the door ...