Buick LaCrosse: Engine Heater - Starting and Operating - Driving and Operating - Buick LaCrosse Owners ManualBuick LaCrosse: Engine Heater

The engine coolant heater, if available, can help in cold weather conditions at or below −18°C (0°F) for easier starting and better fuel economy during engine warm-up.

Plug in the coolant heater at least four hours before starting the vehicle. An internal thermostat in the plug end of the cord will prevent engine coolant heater operation at temperatures above −18°C (0°F).

eAssist Automatic Engine Start/Stop
WARNING! Exiting the vehicle, without first shifting into P (Park), may cause the vehicle to move, you or others may be injured. Because the vehicle has the automatic engine start/stop feat ...

To Use the Engine Coolant Heater
1. Turn off the engine. 2. Open the hood and unwrap the electrical cord. 3.6L V6 Engine The electrical cord is located on the driver side of the engine compartment, between the fender and ...

See also:

Using the Delete All Name Tags Command
The delete all name tags command deletes all stored phone book name tags and route name tags for OnStar, if stored. To delete all name tags: 1. Press . ► For vehicles without a navigation sy ...

Channel selection by operating the dial
Turn the “TUNE/TRACK/CH” dial clockwise to select the next channel and turn the “TUNE/TRACK/CH” dial counterclockwise to select the previous channel. ...

Message when the system was not reset
A Check Control message is displayed. The system detected a wheel change but was not reset. Warnings regarding the current tire inflation pressure are not reliable. Check the tire inflation pre ...