Buick Regal: Engine Oil Pressure Light - Warning Lights, Gauges, and Indicators - Instruments and Controls - Buick Regal Owners ManualBuick Regal: Engine Oil Pressure Light

Do not keep driving if the oil pressure is low. The engine can become so hot that it catches fire. WARNING
Do not keep driving if the oil pressure is low. The engine can become so hot that it catches fire.

Someone could be burned. Check the oil as soon as possible and have the vehicle serviced.

Notice: Lack of proper engine oil maintenance can damage the engine. The repairs would not be covered by the vehicle warranty.

Always follow the maintenance schedule for changing engine oil.

The oil pressure light should come on briefly as the engine is started.

The oil pressure light should come on briefly as the engine is started.

If it does not come on have the vehicle serviced by your dealer.

If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle could be low on oil and might have some other system problem. See your dealer.

    Tire Pressure Light
    For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS. When the Light Is On St ...

    Low Fuel Warning Light
    This light comes on for a few seconds when the ignition is turned on as a check to indicate it is working. If it does not come on, have it fixed. The low fuel warning light (A) comes on and a chime ...

    See also:

    Condensation under the parked vehicle
    When using the automatic climate control, condensation water develops that exits underneath the vehicle. Therefore, traces of condensed water under the vehicle are normal. ...

    Prepare For The Appointment
    If you’re having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charg ...

    Wiper intermittent time control
    When the wiper switch is in the “INT” position, turn the dial to adjust the operating interval of the wiper. The operating interval can be adjusted in five steps from the shortest interval t ...