Volvo S60: Extra high beam - Introduction - Maintenance and specifications - Volvo S60 Owners ManualVolvo S60: Extra high beam

1. Remove the headlight housing from the vehicle (see page 306).

1. Remove the headlight housing from the vehicle (see page 306).

2. Remove the cover over the bulbs (see page 308).

3. Remove the bulb by turning it counterclockwise and pulling it straight out.

4. Remove the connector from the bulb.

5. Press the new bulb into the socket and turn it clockwise to put it in place. It can only be secured in one position.

6. Put the cover back into position and reinstall the headlight housing.

    High beam, Halogen
    1. Remove the headlight housing from the vehicle (see page 306). 2. Remove the cover over the bulbs (see page 308). 3. Remove the bulb by turning it counterclockwise and pulling it straight out. ...

    Turn signals
    1. Remove the headlight housing from the vehicle (see page 306). 2. Remove the cover by pulling it straight out. 3. Pull the holder to access the bulb. 4. Press in the bulb and turn it to remove ...

    See also:

    Starting the Engine
    With advanced key Refer to “Starting the engine” for information on how to start the engine. NOTE: Engine-starting is controlled by the spark ignition system. This system meets all Canadian In ...

    Running-in
    Tyres WARNING: New tyres need to be run-in forapproximately 500 kilometres (300miles). During this time, you mayexperience different drivingcharacteristics. Brakes and clutch WARNING: Avoid heavy ...

    Leaving After Parking on a Hill
    1. Apply and hold the brake pedal while you: 1.1. Start the engine. 1.2. Shift into a gear. 1.3. Release the parking brake. 2. Let up on the brake pedal. 3. Drive slowly until the trailer is ...