Subaru Legacy: Fan speed control dial
The fan operates only when the ignition switch is turned to the “ON” position. The fan speed control dial is used to select four fan speeds.
Control panel
1) Fan speed control dial 2) Temperature control dial 3) Airflow control buttons 4) Air conditioner button 5) Air inlet selection button 6) Rear window defogger button (Refer to “Defogger and ...Temperature control dial
This dial regulates the temperature of airflow from the air outlets over a range from the blue side (cool) to red side (warm). ...See also:
Explanation of general maintenance items
Additional information on the following
items with “ * ”is found later in this section.
Outside the vehicle
The maintenance items listed here should be
performed from time to time, unless othe ...
Troubleshooting guide
Verify the location of all Intelligent Keys that are
programmed for the vehicle. If another Intelligent
Key is in range or inside the vehicle, the vehicle
system may respond differently than expect ...
Vehicles Without Wheel Covers
1. Mount the road tire on the axle.
2. Install the remaining lug nuts with the cone shaped
end of the nut toward the wheel. Lightly tighten the lug
nuts.
WARNING!
To avoid the risk of forcing t ...