Ford Fusion: Fastening the seat belts
WARNING:
Insert the tongue into the buckleuntil you hear a distinct click. Youhave not fastened the seat beltproperly if you do not hear a click.
Pull the belt out steadily. It may lock if youpull it sharply or if the vehicle is on a slope.
Press the red button on the buckle torelease the belt. Let it retract completelyand smoothly.
Principle of operation
Airbags
WARNINGS:
Do not modify the front of yourvehicle in any way. This couldadversely affect deployment of theairbags.
Original text according to ECER94.01: Extreme Hazard! Do not usea rearward ...
Seat belt height adjustment
Seat belt height adjustment
Note: Lifting the slider slightly whilepressing the locking button makes iteasier to release the locking mechanism.
To raise or lower, press the locking buttonon the adju ...
See also:
Low beam, Halogen
1. Remove the headlight housing from the vehicle (see page 306).
2. Remove the cover over the bulbs (see page 308).
3. Unplug the connector from the bulb.
4. Remove the bulb by pulling it straigh ...
Reading Lamps
There are front and rear reading
lamps.
The front reading lamps are located
in the overhead console.
The rear reading lamps are located
in the headliner.
or
: Press to turn each lamp
...
Headlamp range control
With halogen headlamps, the headlamp range of
the low beams can be manually adjusted for the
vehicle load to avoid blinding oncoming traffic.
The values following the slash apply to trailer
ope ...
