Buick LaCrosse: Floor Mats - Appearance Care - Vehicle Care - Buick LaCrosse Owners ManualBuick LaCrosse: Floor Mats

WARNING!
If a floor mat is the wrong size or is not properly installed, it can interfere with the pedals.
Interference with the pedals can cause unintended acceleration and/or increased stopping distance which can cause a crash and injury. Make sure the floor mat does not interfere with the pedals.

Use the following guidelines for proper floor mat usage:

• The original equipment floor mats were designed for your vehicle. If the floor mats need replacing, it is recommended that GM certified floor mats be purchased. Non-GM floor mats may not fit properly and may interfere with the accelerator or brake pedal. Always check that the floor mats do not interfere with the pedals.

• Use the floor mat with the correct side up. Do not turn it over.

• Do not place anything on top of the driver side floor mat.

• Use only a single floor mat on the driver side.

• Do not place one floor mat on top of another.

Removing and Replacing the Floor Mats

Pull up on the rear of the floor mat to unlock each retainer and remove.

Reinstall by lining up the floor mat

Reinstall by lining up the floor mat retainer openings over the carpet retainers and snap into position.

Make sure the floor mat is properly secured in place.

Verify the floor mat does not interfere with the pedals.

    Instrument Panel, Vinyl, and Other Plastic Surfaces
    Use a soft microfiber cloth dampened with water to remove dust and loose dirt. For a more thorough cleaning, use a soft microfiber cloth dampened with a mild soap solution. Notice: Soaking ...

    See also:

    Using voice activation
    Activating the voice activation system 1. Press the button on the steering wheel. 2. Wait for the signal. 3. Say the command. The command is displayed in the instrument cluster. This symb ...

    Dolly Towing from the Rear
    Dolly Towing from the Rear The vehicle cannot be dolly towed from the rear. ...

    Car washes
    Notes Steam jets or high-pressure washers When using steam jets or high-pressure washers, hold them a sufficient distance away and use a maximum temperature of 140 ℉/ 60 ℃. Holdi ...