BMW 5 Series: Fold-out position of the wipers - Washer/wiper system - Driving - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Fold-out position of the wipers

Required when changing the wiper blades or under frosty conditions, for example.

1. Switch off the ignition.
2. Under frosty conditions, ensure that the wiper blades are not frozen onto the windshield.
3. Press the wiper lever up beyond the point of resistance and hold it for approx. 3 seconds, until the wiper remains in a nearly vertical position.

After the wipers are folded back down, the wiper system must be reactivated.

Before switching the ignition on, fold the Fold the wipers back down
Before switching the ignition on, fold the wipers back down to the windshield; otherwise, the wipers may become damaged when they are switched on.◀

1. Switch on the ignition.
2. Press the wiper levers down. The wipers move to their resting position and are ready for operation.

    Windshield washer nozzles
    The washer jets are automatically heated whenever the ignition is switched on.   ...

    See also:

    Parking brake
    Before leaving the vehicle, make sure that the parkingbrake is fully applied. Also, be certain to leave thetransmission in PARK. The parking brake lever is located in the center console. To apply ...

    Starting the Engine
    With advanced key Refer to “Starting the engine” for information on how to start the engine. NOTE: Engine-starting is controlled by the spark ignition system. This system meets all Canadian In ...

    Wheel Replacement
    Replace any wheel that is bent, cracked, or badly rusted or corroded. If wheel nuts keep coming loose, the wheel, wheel bolts, and wheel nuts should be replaced. If the wheel leaks air, repla ...