Buick LaCrosse: Footnotes — Maintenance 
Schedule Additional Required 
Services — Severe - Footnotes — Maintenance 
Schedule Additional Required 
Services — Normal - Maintenance Schedule - Service and Maintenance - Buick LaCrosse Owners ManualBuick LaCrosse: Footnotes — Maintenance Schedule Additional Required Services — Severe

a) Or every two years, whichever comes first.

b) Check all fuel and vapor lines and hoses for proper hook-up, routing, and condition. Check that the purge valve, if the vehicle has one, works properly. Replace as needed.

c) Or every four years, whichever comes first.

d) Do not directly power wash the transfer case output seals. High pressure water can overcome the seals and contaminate the transfer case fluid. Contaminated fluid will decrease the life of the transfer case and should be replaced.

e) Or every five years, whichever comes first. See Cooling System.

f) Or every 10 years, whichever comes first. Inspect for fraying, excessive cracking, or damage; replace, if needed.

    Footnotes — Maintenance Schedule Additional Required Services — Normal
    a) Or every two years, whichever comes first. More frequent replacement may be needed if the vehicle is driven in areas with heavy traffic, areas with poor air quality, or areas with high du ...

    Special Application Services
    • Severe Commercial Use Vehicles Only: Lubricate chassis components every 5 000 km/3,000 mi. • Have underbody flushing service performed once a year. ...

    See also:

    Important safety notes
    You will find an illustration of the instrument cluster in the "At a glance" section WARNING A driver's attention to the road and traffic conditions must always be his/her primary ...

    Instrument panel
     Instrument panel 1. Side and center vents. 2. Headlight/fog light (if so equipped)/turn signal switch. 3. Steering wheel switch for audio control and Bluetooth Hands-Free Phone System. 4. ...

    Return to Factory Settings
    Select Return to Factory Settings to return all of the vehicle personalization to the default settings. Turn the Menu knob to select Yes or No. Press SELECT to confirm and go back to the l ...